WaterCheck CP - Package of 6 Bottles

WaterCheck™ CP
All Purpose Disinfectant Test Strip

• Easy to use strip test
• Residual and potency test in one
• Reacts with chlorine, peroxide, iodine, and other oxidants
• Detection range, 0 - 5000 ppm chlorine
• Easy to read color blocks
• 0   0.5   1.0   ppm chlorine, 1%, 10% bleach

Chlorine/Peroxide/Bleach. All purpose test strips.
This is the most versatile test strip. The strip is sensitive to varieties of disinfecting agents, such as, chlorine, bromine, peroxide, iodine or ozone. The strip measures total chlorine. It will react to chlorine concentrations from trace to over 1000 ppm. The strip color will turn from light blue to dark blue, to dark brown. It is a residual chlorine and potency test for bleach, both in one strip. Because of its high sensitivity for peroxide, the strip is also commonly used for detection of residual peroxide in rinse water from RO column after disinfected with peracetic acid.

About the Test:

Bleach chlorine or peroxide solution are commonly used for disinfection of medical instruments or equipments, such as dialysis machines or water purification system. After the disinfection, the chemical is then rinsed off with deionized water or RO water before the instruments or the water system can be returned to service.

In the commercial Bleach solution, it usually contain 5.25 or 6.0 % of sodium hypochlorite. The chlorine is in the form of free available chlorine and reacts as an oxidant The peroxide based sterilant usually contain a mixture of peroxyacetic acid (peracetic acid or PAA) and hydrogen peroxide. Peracetic acid is a much stronger oxidant and is the main chemical for sterilization effect. Both peroxide chemicals, however, react equally with the WaterCheck CP test strip. The WaterCheck CP test strip is a most versatile, all-in-one test strips for chlorine, peroxide or peracetic acid.

WaterCheck CP strip will also react with high levels of chlorine to a distinct brown color. The strip can be used as a residual as well as potency test strip for chlorine.

Product Features:

1. Fast and sensitive.

• Color reaction complete instantly to the chlorine in the sample.
• Reacts equally with chlorine or peroxide.
• Detection sensitivity for both chlorine or peroxide is about 0.2 ppm
• For chlorine, the strip reacts with 500 or 5000 ppm to a distinct color..

2. Very consistent

• Consistent color reaction from lot to lot.
• Reliable results every time and all the time

3. Easy to read colors

• The strip color progresses from cream white to very light green, green, blue, dark blue then to black/brown in response to less than 0.2 ppm trace to 5000 ppm chlorine.
• Green, blue colors are very easy to read even under poor lighting condition.

4. Residual and potency strip in one

• The strip uses a dual indicator color system.
• It has very broad detection range, from trace to 200 ppm and 5000 ppm
• It turns green at low chlorine levels, and blue/brown at high levels.
• It can be used as a residual strip or a potency strip for bleach/chlorine.

5. Long shelf life, stable at room temperature

• The dry strip is stable at room temperature.
• The shelf life is at least 3 years from the time of manufacturing.

Simple Steps to Use

The strip is primarily designed for use in hemodialysis disinfection control. However, it can also be used in different applications.

For disinfection of dialysis machines, bicarbonate mixing tanks or water distribution system, the final rinse water should have none or less than 0.5 ppm of residual chlorine according to the AAMI standards. The simple strip test can verify the compliance of the water quality.

1. Collect the test sample in a clean cup from the sample port according to the manufacturer of the dialysis system.
2. Dip the strip in the test solution for one second.
3. For midstream sampling, wet the strip in the stream of test water briefly.
4. Gently shake off the excess water.
5. Compare the strip color to the color chart on the label.
6. Any trace of green color is an indication of the presence of residual chlorine.

How to Interpret the Test Results

Interpretation of the test results depends on the nature of the testing.

Chlorine Tests:
Using the one second dip-and-read test procedure, the strip can detect as low as 0.2 ppm of residual chlorine and will show a recognizable green color. Although the maximal allowable residual chlorine contaminant level in the rinse water is 0.5 ppm by AAMI standards, in practice, all rinse water in hemodialysis setting is tested negative with the strip. If tested positive, the rinsing should be continued.

If measurement of a more accurate chlorine level is desired, a 5 second test procedure should be followed by holding the strip under a slow running test water for 5 seconds and comparing the strip color with the color chart immediately. The strip color will be intensified at the end of 5 seconds. The length of the contact time of the strip with fresh test sample determines the final intensity of the strip color. The longer the contact time, the darker the strip color will be. The actual strip color may vary depending on how the test is done and the lighting condition of the room. The residual color blocks on the label are standardized with the 15 second test procedure and is considered semiquantitative only.

Peroxide Tests:
For solutions with a mixture of hydrogen peroxide and peracetic acid, it has approximately an equivalent oxidation reactivity as chlorine on ppm bases. For semiquantitative interpretation of the results, the color blocks are labeled for both chlorine and peroxide. Although 3 ppm peroxide in the rinse water is considered safe by some, it is desirable to control the residual peroxide to none or less than 0.5 ppm.

Type of Samples

The strip is the most commonly used in detecting chlorine in water. However, the strip can also be used for detecting chlorine in other media, such as dialysate or bicarbonate solutions. In the blood, plasma or serum, chlorine will reacts with blood components such as ascorbic acid or other antioxidants, also with serum proteins and reduce the detectable chlorine level. What is detected in such media is the remaining of the chlorine rather than the initial level of chlorine contamination. In urine, chlorine will react with ammonia decomposed from urea and form chloramine. Chloramine is much more stable than free chlorine and can be detected with the strip after weeks of storage in the refrigerator. In organic solvents or oil, the presence of chlorine can also be detected by the strip. Results with all media other than clean water should only be interpreted as qualitative.

How to Chose the Right Chlorine Test Strip for Your Specific Application

Since the test is based on the oxidative election transfer of chlorine molecules, chlorine will reacts to a variety of indicator system of different chemical properties. Because of this, not all the chlorine tests are created equal even when the same chemical indicator is used. They all differ in detection sensitivity, detection range, chemical specificity and thermal stability.

IBT offers three chlorine test strips for different applications. The following table compares the main features and the suggested applications of each strip.